SkylinkNet app for iPhone and iPad
4.8 (
8448 ratings )
Utilities
Lifestyle
Developer:
Skylink Group
Free
Current version:
2.4.6, last update: 1 year ago
First release : 22 Jun 2014
App size: 58.45 Mb
SkylinkNet allows you to monitor your home with your smartphone. With the built-in alarm features, you can remotely arm, disarm, and monitor various activities with this app.
Create a smarthome by adding home control modules to control lights, electrical appliances and other household devices.
The Internet Hub sends you push notification when sensor is activated, allowing you to monitor your home remotely. With the surveillance camera, you can see live action of the area you want to monitor.
•Wireless Alarm System – Remote Arming / Disarming, Arm Home, Arm Away, Instant Alarm, Sensor Bypass, Remote
•Receive Push Notifications anytime a new activity takes place
•Customized alarm settings such as alarm duration, entry / exit delay duration etc.
•Home Automation with all Skylink Modules, including Wall Switch, Wall Dimmer, Plug-in dimmer, Outdoor Module etc.
•Add up to 100 sensors and controllers (lighting or appliances controllers)
•Receives low battery alert on all devices thru push notification
•Event log stores all recent 100 activities
•Add up to 10 cameras for video monitoring
•Add outdoor solar siren for additional security, which is completely wireless
•Connect to external phone dialer (Telephone Line or Cellular) as a backup solution when Internet fails
•No monthly fees and no contract
You must have the Skylink Internet Hub and other necessary hardware to achieve these features.
Pros and cons of SkylinkNet app for iPhone and iPad
SkylinkNet app good for
So far 5 Stars and holding. I am installing one sensor after the next without any problems as long as I read the directions first! All sensors seem to be nice and sensitive enough to trap an intruder quite well. Your hard work to produce a quality product is appreciated.
Would be nice to have a Windows version of the app.
So far app works great.Love all the customization of sensors.
However would like more of an alarm or a distinctive sound for notifications
I really like the app and the alarm system. I do not like the fact that you have to check event log to see if someone else has arm the alarm and if you were the one armed it, you have to arm it and then unarm it just to get it to unarm. But the event log shows if its armed or unarmed properly so it needs to be able to refresh. Im using iPhone 6 on AT&T and it works great. I wish you could add timed arming and automatic video recording. Thank you!!!
overall easy App to use. really like all the options for all the sensors, wich all the sensors can have there own setup on how to respond to an activation and how you can receive notification. Notification usually get to your phone within 2 seconds.
The only down side so far is that i have the App on my phone and my wife as the app to. If one or the other Arm the system the other person dont see that the system is arm, unless of restarting the app... thats the biggest down side i have so far!!!
Easy to use and set up, wish camera was motion sensored, only flaw in the app is that it will not tell you if the alarm is armed unless you refresh the home screen by swiping down. At first I found if very frustrating as the previews reviewers but after finding out that refreshing the home page will show the status of the alarm.
Ihave ipad 1 and iwant to install this app with it
But your app work only with 6.0 ios and my ipad cant update to this ios what can i do !!!!!
Some bad moments
I tried creating an account this past weekend. After setting my password and clicking the verification link in my email - all the app would return was either "access denied" or "could not connect". The whole reason to get a DIY home security system is to not tie yourself to an external service - especially one whose servers can go down for over 24 hours at a time (which effectively disables your home security).
Good product as long as app is working properly. Touched the App and it shows logo screen but wont go further. Installed app again its same. Without proper app running this system is a crap.
The software he simply just needs an update. It freezes on two brand-new iPhones, one iPad, and one iPod touch.
The whole software side of things is very simple and easy to set up, but it constantly crashes on all of our platforms.
The most annoying part, is the fact when I come home the alarm is rarely set even when I watched the timer do its countdown. The software never fully sends the information. So then I come back, it says its off but then the alarm goes when I open the door.
The worst part then is I try to arm and disarm the alarm with the app, and it simply continues to say that its off even though the alarm is going. The only fix I noticed is force closing the app 2 to 3 times before it actually recognizes.
When they update the software to be more reliable, Im a firm believer this will be a five star application
Cant create an account through the app. When logging in say Access denied. When using forgot password get Access denied when entering email address.
Everything worked beautifully for three months. With this update the alarm has been going off continuously even when the screen says disabled. It is a non-functional unit at this point
App keeps crashing and causing my phone to freeze. The only way I can get back in the app is to uninstall and then reinstall. The system works great, but the app needs work ASAP! Please please fix.
